How to Create the Fishing Setting for Living Bait Trolling

Living Bait Trolling Mounting 1

The study and the choice of a winning fishing line for living bait trolling requires a lot of time and experience, made available in today's video by the expert of the Tubertini team, which carefully explains what are all the steps for the creation of a proper fishing setting.

First of all, it is important to know what tools you need to have in order to create a similar terminal.

A scissor, a grip pliers, 5180 hooks as main hooks, SSW hooks as leading hooks, TB 110 swivels, small rubber bands, a green sheath, Momoi Neo fluorocarbon, 0.47 Jig Line and Gorilla hooks.

The expert immediately explains how to make a fundamental knot for this type of fishing, namely the crazy knot, a knot with a breaking load of 110%, due to a greater springing of the knot itself that at the time of tearing widens, resulting in a 10% breaking load more.

Living Bait Trolling Mounting 2

To create it, it is necessary to take the fluorocarbon and swivel mentioned above and lock the swivel with a grip clamp and place it in the clamp. Then thread the wire into the swivel, sliding it for about 30 cm, taking the two endings and starting to turn them one on top of the other, making about five turns and then shaking with the hand. After tightening, make three turns in the opposite direction, tightening, and then make another three turns and tightening until you get very close to the swivel. Once you have reached the end, near the swivel, insert the ending into the eyelet and then tighten with the pliers.

Living Bait Trolling Mounting 4

A secret for a better hold of the knot is, after its realization, to go to strengthen the closure, wrapping a braided at the base of the swivel, above the closure itself.

Living Bait Trolling Mounting 0

Immediately after, the terminal is made with about three metres of Neo fluorocarbon and the SSW hooks in size 8/0, by passing one end of the fluorocarbon inside the green linen sheath and, with a rubber band, the hook is connected to the line, then cutting off the excess.

Living Bait Trolling Mounting 7

After connecting the hook, the final dubbing is carried out, creating a new crazy knot that, once removed from the clamp, will create a dubbing that will end up in the mouth of the fish. As before, this knot will be reinforced with braided, to ensure even more hold. At the end of this doubling is placed the main hook, very similar in size to that of the leading hook, which is also reinforced with braided to prevent it from sliding along the stem of the hook.

Living Bait Trolling Mounting 8

Once the realization of this fishing system, called by the protagonist crazy flower, is finished, it is time for a tip for fans of living bait trolling for the triggering of squid with two little hooks.

Living Bait Trolling Mounting 9

The Jig Line is necessary, with a rather large diameter, to be inserted in the hook's eyelet and then closed with a three-turn knot, then connecting a second hook with the same knot. This fishing apparatus will be connected to the main hook triggering with the little hoooks the squid in the part of the tentacles.

The fishing system is thus concluded and, although it takes time to be realized, it is one of the most effective and successful among the fishing systems for living bait trolling.

Living Bait Trolling Mounting 0 Living Bait Trolling Mounting 1 Living Bait Trolling Mounting 2 Living Bait Trolling Mounting 3 Living Bait Trolling Mounting 4 Living Bait Trolling Mounting 5 Living Bait Trolling Mounting 6 Living Bait Trolling Mounting 7 Living Bait Trolling Mounting 8 Living Bait Trolling Mounting 9

related articles